TABER Refacing Disc S-11美國TABERS-11表面修正砂紙，也稱TABER預磨砂紙、TABER彈性砂輪修正砂紙，為美國原裝進口，專門配合TABER磨耗試驗機測試前進行砂輪的預磨預處理,從而使砂輪能在測試中達到標準的磨損系數。
符合標準:DIN-53754,53799,53109,52347,TAPPI-T476,ASTM-D4157.
原裝規格:100片/盒,直徑4"(100mm)、內圈直徑7mm
粒度:150目
TABER S-11 Refacing Disc – 4" (100mm) diameter, 150 grit abrasive paper 100 pcs.
used to Reface Taber Calibrase® abrading wheels (resilient type). (sold in packages of 100 pieces).
Calibrase wheels such as CS-10 and CS-17 are typically are refaced with the S-11 Refacing Disc. Sold in
packages of 100, the S-11 refacing disc is a 4" diameter, 150 grit abrasive paper. The useful life of a S-11
Refacing Disc is only 1 refacing. Regardless whether the disc has been used for 25 or 50 cycles, the refacing
disc should be discarded. Refacing with a used disc may change the wear coefficient of the wheel faces, and
invalidate your test results.
TABER INDUSTRIES
ABRASER REFACING DISCS
FOR RENEWING FACES OF
RESILIENT CALIBRASE WHEELS
QUANTITY:100
CAT NO.:S-11
DIRECTIONS
Each refacing is good for one 25 or 50 cycle refacing operation
only,then it must be discarded.
S/C W/P PAPER T9 C CLOSED
JH:150#
esternal diameter:102mm
inside diameter:7mm
